Are you sure you want 8 ft lengths?

For the lowest shipping cost, we suggest 6 ft or shorter when possible. 8 ft lengths add substantially to UPS and FedEx shipping charges.

Full lengths are quoted by phone

We only sell short lengths online. For full mill lengths of 20–24 ft, please call us for a quote and we'll price the pipe and freight together.

Call 1-800-METPIPE

Mon–Fri, 8am–4pm ET

2" pipe is quoted by phone

2" aluminum pipe isn't sold online. It's available by quote only, in cut or full mill lengths. Call us and we'll price the pipe and freight together.

Call 1-800-METPIPE

Mon–Fri, 8am–4pm ET

 Skip to main content

Authorized Hollaender® distributor Made in the USA

Order by phone: 1-800-METPIPE

About the #10

The #10 lets two pipes cross at 90° without sharing a plane: one passes just in front of the other, and both run straight through. Reducing versions join two different pipe sizes in one fitting.

Like every Nu-Rail® fitting, it's cast from corrosion-resistant 535 aluminum-magnesium alloy and locks onto standard pipe with set screws. No welding, no threading, just a hex key. Loosen the screws and you can reposition it or take the whole structure apart later.

Where it's used

  • Layered grids and lattices
  • Lighting and rigging grids
  • Braces that pass beside a post
  • Joining two pipe sizes (reducing sizes)

Sizes & options

Available for 3/4" to 2" IPS pipe, plus reducing sizes (3/4" x 1", 1" x 1-1/4", 1-1/4" x 1-1/2", 1-1/2" x 2"). We stock the standard mill finish. Anodized fittings and stainless steel set screws for harsh environments are available on request; call 1-800-METPIPE.

Specifications

Figure
#10
Fits
3/4" to 2" IPS pipe, plus reducing sizes
Casting
ASTM B26
Alloy
ASTM B179 535 Aluminum/Magnesium Alloy
Finish
Bright Burnished Mill Finish
Fastening
Set screw, hex key (no welding or threading)
  • Slip-on
  • Reducing
  • Offset

Sizes & pricing

Item # Pipe size SKU Price Availability Add to cart
#10-5 3/4" 8757 $31.73 In stock
#10-6 1" 8783 $41.05 In stock
#10-7 1-1/4" 8816 $42.37 In stock
#10-8 1-1/2" 8851 $46.81 In stock
#10-9 2" 195854 $74.69 In stock
#10-56 3/4" x 1" 40375 $31.21 BackorderShips in 2–3 weeks
#10-67 1" x 1-1/4" 883467 $37.76 In stock
#10-78 1-1/4" x 1-1/2" 887432 $42.43 In stock
#10-89 1-1/2" x 2" 887434 $66.00 Only 3 left in stockMore on the way

Buying several sizes? Add each one right from this table. For job-site quantities, call 1-800-METPIPE.

How it goes together

  1. Slide it on Cut pipe to length and slip the fitting over the end. No threading.
  2. Position it Slide to height and set the angle before you lock it.
  3. Tighten the set screws Lock it with a hex key. Loosen it to adjust or take it apart later.
See all offset crosses